服务热线
021-62099007
您的位置：首页 > 产品中心 > Finish brands > DEVILBISS > RANSBURG、DEVILBISS、BGK、BINKS喷枪106-1270
产品中心产品介绍
RANSBURG、DEVILBISS、BGK、BINKS喷枪106-1270
RANSBURG、DEVILBISS、BGK、BINKS喷枪106-1270
上海芈嘉机电设备有限公司专业供应*的德、英、法、意等欧洲**工业备件！
进口备件，我们是专业的；供应产品，我们是忠诚的；售后服务，我们是**的！！！
选择我们，选择品质。
咨询、洽谈，如下：
：
号码: ：
： :
公司：http://www.thinkfon。。ｃｏｍ
公司地址：上海浦东新区沪南路2218号BHC中环中心西楼901室
| 106-1270 | FRX SEAL KIT* |
| T-AGPV-868-805MT-FX | AUTOMATIC SPRAY GUN |
| PROL-HV30B-D-13 | DIGITAL GRAVITY GUN/CUP - BASE |
| ADV-P522-085-A | ADVANCE PRESS SPRAYGUN T/T AUTO |
| EMF-192 | AIR CAP LOCATOR |
| VPR-E31-12 | AUTO SPRAY GUN, CERAMICS, T/T |
| 11843-3040 | NOZZLE 300MM,D=0.38MM |
| 4X6-18-T-SG | HOSE CON.1/8NPT(M)W/SPRING |
| JJ-30 | CONNECTOR AIR |
| 20-5051 | PIPE PLUG-1/16" DIA SOCKE |
| 75777-02-K5 | GUN COVERS |
| 500-775 | O RING 9.00X1.50 VITON |
| 1438-SG-FA-B | SS HOSE CONN/SPR.GUARD 3/8 BSP |
| QS-49 | DRUCKFEDER CD |
| 0114-013961 | PACKING RING LEATHER |
| 0115-010130 | MOTOR ROD |
| 2803-00 | PAINT TUBE |
| SSQD-2T-316 | QD CONNECTION 1/8"NPT(M).STS |
| ZZ-3207 | REDUCING NIPPLE 1" M-3/8" M SS |
| 183-3000 | BOTTOM OUTLET CONVERSION KIT |
| LSME0004-00 | CONTACT CLIP, TRIPLE |
| ADV-G510-13 | ADVANCE GRAVITY GUN KIT T/T |
| 0115-010003 | CYLINDER |
| SPK-120 | NEEDLE SEAL KIT AA4400A |
| 193470 | UPPER HOUSING MACHINING |
| NP-4TL | 1/4" ID NYLON TWIN HOSE (MTRS) |
| 6714-00 | COLLAR |
| 101-9427 | STUD |
| MX44018PU-SMB | MX44018PU-SMB PUMP ASSEMBLY |
| 0114-013895 | MOTOR AXLE LM200/120 |
| 180427 | L500-10 NEEDLE BODY |
| 102-1709 | TRIGGER |
| AEMD-4136 | SEALING PLUG 1/8" |
| 8406400006 | OUT FLUID TUBE BACK |
| 80239-14-K3 | NOZZLE, FLUID T14 (PACK OF 3) |
| KK-4504-FXH-765 | CAP.TIP.NEEDLE - JGA/V.GFG/V |
| AF3013-2 | SYSTEM GERA PUMP ASSY |
| KGP-509-1 | GRAVITY CUP.1/2 PINT.W/BORNE |
| 41-12554 | FEMALE ADAPTER |
| PROL-TE20B-D-12 | DIGITAL GRAVITY GUN/CUP - BASE |
| 8406400007 | OUTER FLUID TUBE FRONT |
| 84-404 | 3/4" SS BP VALVE ASM |
| MXL1231PU-W-AL | MXL1231PU,WALL |
| CBA2-522-14 | COBRA 2 AUTO GUN/CAP/MOUNT TT |
| SSP-38-ZN | CONNECTOR 1/4" |
| 3688-01 | SNAP RING |
| 237-891 | RETAINING RING |
| AGMD-245 | BASE PLATE WITH LOCK DEVICE |
| 192654 | RD END FEATHER KEY 14X9X50 LG |
| 54-3592 | FLUID INLET SEAL |
| 182820 | TRIGGER PIN |
| COB52-31 | 9" EXTENSION NEEDLE (12"SC) |
| 20-6706 | O-RING |
| VECAA-CA-30 | HOSE SET 30M FOR AA90 CASCADE |
| 0300400049 | SUSPENSION |
| 0909-4400-HF000E | AA4400M HVLP GUN (NO TIP) |
| 79503-32200 | VECTOR R90 CLASSIC GUN AND 20M |
| 207-10060 | AIR MOTOR BEARING |
| 54-1220 | SS PIN |
| KY5X5X15 | KEY |
| ADV-310-13-K | FLUID NEEDLE 13 |
| CBA2-513-14-G | COBRA 2 AUTO GUN/CAP NO BASE |
| EXTADV-C-60 | TYPE C EXTENSION ADVANCE 60" |
| 2207-18 | PACKING GLAND |
| HGB-510-R4 | FLUID REG..REMOTE CONTROL 4:1 |
| EXTCB2-C-06 | TYPE C EXTENSION COBRA2 6" |
| 72-1729 | SWIVEL CONNECTION |
| MPV-623 | INTEGRAL VISOR/BELT KIT |
| 79798-03 | CAP SCREW M5X30 |
| AGMD-341 | SEAL |
| PROL-TE20C-D-13 | DIGITAL GRAVITY GUN/CUP -CLEAR |
| 9-2640 | AIRLESS NOZZLE |
| CBA1-590-05 | COBRA 1 AUTO GUN/CAP TRANSTECH |
| ADV-S500-18 | ADVANCE SUCTION GUN KIT HVLP |
| 0300-400101 | BEARING UNIT SLIDING |
| 0114-014480 | PRESSURE SPRING |
| MXA-C13ALM5 | AIR CONTROL ASSY 1/2" (AL) |
| ADV-G510-12 | ADVANCE GRAVITY GUN KIT T/T |
| AG362U-TE20-18-SF | RECIRC AUTO GUN KIT |
| ADV-GP513-22 | ADVANCE PRESS ASSIST GUN T/T |
| A11065-05C | AIR HEATER, CELSIUS |
| AG362-HV30-085-T | HVLP AUTO GUN KIT |
| 54-839 | SPRING |
| 80240-00 | AIR CAP, T SERIES |
| ADV-GP515-22 | ADVANCE PRESS ASSIST GUN T/T |
| AGG-88-K2 | HEAD SEALS (PACK OF 2) |
| AGMD-3278-R-1-01 | DOUBLE GUN ADAPTER BLOCK |
| SSG-8166 | GLYD RING |
| 101901 | BUSHING D=30-18,8X70 |
| PG-160-4T | PRESSURE GAUGE 11 BAR,1/4"NPT(M) |
| 250625 | FLUID PISTON SEAL KIT FOR |
| 118-82320 | CENTURY LEL SPRAY TIP |
| 9-1111-F | FINE FINISH FLAT TIP |
| 207-11182 | CHOPPER GUARD ASSEMBLY |
| 102-2403 | INLET FITTING |
| AG362P-90HV-05-L | PETITE AUTO GUN KIT |
| MF-6B-70B | STS MINI FILTER.BSP.70 MESH |
| JGX-46-K10 | CIRCLIPS (PACK OF 10) |
| 37-337-5 | GASKET (PACK OF 5) |
| GTISPRO-T2-16 | SUCTION FEED PRO SPRAYGUN KIT |
| 70430-00 | ELECTRODE,RESISTIVE,STD, GREY |
| R037530010 | VERBINDUNGSPLATTE |
| 20-1592 | PIPE PLUG 3/8 DIA,GALV OR CAD |
| MXL432PL-T-F-AC | MXL432PL, TRIPOD, FILTER |
| DSG-1 | SNAP RING |
| 192720 | SENSOR MANIFOLD |
| AA44H-10-MB | AUTO SPRAYGUN WITH MANIFOLD |
| 102-2722 | SS NEEDLE ASSY |
| 86-8 | RELEASE VALVE ASSY |
| DIN934M8VA | HEXAGON NUT SS |
| SPA-93-K | BUNG & O-RINGS AA4400A |
| PROL-HV30B-14 | GRAVITY GUN & CUP BASE |
| 6X8-14-SS-B | HOSE CONNECTION 1/4BSP(F) |
| ZZ-3212 | LEGRI 1/8" FOR 4MM AIR HOSE |
| 193440 | CV CAM |
| ADV-S510-18 | ADVANCE SUCTION GUN KIT T/T |
| RY-6LB | LIGHTWEIGHT RESTRICTOR BSP |
| R38 | PRESSURE REGULATOR 3/8" |
| 79580-12202 | VECTOR AA90 CASCADE SOLV. 10 M |
| 116648B | SEALING SYSTEM |
| SSQD-4B-316 | QUICK DISCONNECTION 1/4"BSP(M) |
| AGMD-243-1-K | BOXED PISTON |
| 502750 | 3/4"BSPP BONDED SEAL WASHER |
| 8488-12F | SCREW.SET |
| 80003-00-K10 | COVER, SOLO POWER MODULE |
| 180441 | RETAINING PIN |
| 863002 | PLUG |
| RPM-452-6 | BELL ASSY 30MM-TITANIUM,SLOTS |
| 250599 | MAIN BEARING OVERHAUL KIT FOR |
| SPA-115 | ELBOW FITTING 1/4" NPT -NPS |
| 2K-4001 | EXTENSION KIT 1VALVE W VALVE |
| 54-4970 | REPAIR KIT - AA1500 |
| 2K-5207 | MAGNET VALVE INCL. CABLE |
| PROLT-PTE30-10 | PRESSURE FEED PROLITE SPRAYGUN |
| 45-9401 | 94VT MAT'L NOZZLE (1.3MM) |
| C-104-K5 | AIR VALVE SPRING (EGA,EGHV) |
| 54-4911 | TRIGGER LOCK PIN (AA1500/4000) |
| 0114-013874 | CYLINDER HEAD |
| 184222 | BODY |
| HD-503 | H.D. HOSE CLEANER (2 QT) |
| PRV16-U-10 | 16 BAR PRESSURE RELIEF VALVE |
| CBA2-522-16-G | COBRA 2 AUTO GUN/CAP NO BASE |
| 104002 | 60GPM FL SECTION BASIC MODEL* |
| 1C484780-24 | FILTERGEHÄUSE DF-0600-MK KA1/2" SP0024 |
| DXK-201 | CHECK VALVE SEAL KIT OF 4 |
| PROC-215-12-K | FLUID NOZZLE |
| 79501-12502 | VECTOR 65kV CASCADE 10M |
| 2846-00 | SPRING |
| MX19070PU-SMH-WAL | PUMP 70:1PTFE/UHMW WALL-1 REG |
| AF0497 | PROBE 300C |
| MX86015PU-SMX | MX86015PU-SMX PUMP ASSEMBLY |
| 250454 | OVERHAUL KIT FOR HP BPR 107908 |
| 54-1197 | PISTON ROD |
| AGMDPRO-C3-14P | AUTO GUN CONV. |
| 102056 | HOSE NIPPLE (FOR ICEBELL) |
| 79500-12502 | VECTOR 85kV CASCADE SOLV.10M |
| PROSL-TE20-16 | SUCTION FEED PROLITE SPRAYGUN |
| 0114-016263 | LOWER PACKING MP27/75 0432 |
| A10840-09 | ORANGE TUBE 15' |
| 79570-00 | BRACKET SUPPORT |
| ADV-P510-16 | ADVANCE PRESS SPRAYGUN T/T |
| CBA1-522-16 | COBRA 1 AUTO GUN/CAP TRANSTECH |
| DVP-17 | SILENCER |
| MX19042PU-CAH-CAL | 42:1 PUMP PTFE/UHMW CART,1 REG |
| P-HC-4224 | CONNECTION(3/8 NPS F.SPR.GD) |
| 76623-03 | MVR NEEDLE.NO 3.CATALYST |
| 80143-232 | 9060 LOW VOLTAGE CONTROL UNIT |
| KK-4501-G-H | SERVICE KIT FOR AGG GUN |
| SPA-412-K | KIT OF O RINGS (CBA3C) |
| 13076-13 | O RING PTFE |
| 79997-00 | COMPENSATION VALVE,VECTOR SOLO |
| F-DA-007 | DIAPHRAGM |
| T-AGB-10-1 | NEEDLE SEAL KIT |
| ADV-P497-14N | ADVANCE PRESS SPRAYGUN CONV |
| 183G-1010-CE-B | 40L GALV TANK NO AGIT. |
| DR60E-MX22035PU-CMB | DR60E-MX22035PU-CMB OUTFIT |
| H-5853 | AIRLESS HOSE ASSY 3/8ID 15M |
| 184581 | SCREW |
| ADV-S513-18 | ADVANCE SUCTION GUN KIT T/T |
| 873014 | SLEEVE WHITE |
| DX200SR3-T | DX200S REGULATED, TRIPOD MOUN |
| 41-12635 | LEATHER V-PACKING |
| SP-259N-085-K | BOXED FLUID TIP (COMPACT) |
| 0115-010224 | REPAIR KIT FX4 PTFE |
| 9-419-75 | SPRAY TWIST TIP 419 (7500PSI) |
| 207-12305-7 | CATALYST HOSE ASSY 35 FT |
| 250598 | LINEAR GUIDE & ROD KIT FOR |
| 7959-24C | SCREW 1/4-20X.75 HEX SOC. |
| 207-11547-K5 | SEAL (PACK OF 5) |
| NHA-6X4 | NYLON HOSE 6ODX4ID (MT) |
| RPM-26 | FRONT BEARING |
| DSG-4001 | SEAL KIT |
| 18872-00 | GASKET |
| 102-3845 | GUARD ASSEMBLY |
| EXTCB2-C-12 | TYPE C EXTENSION COBRA2 12" |
| 79965-12201 | SOLO 65 SOLV. 10M, 0.093 COIL |
| JGX-13 | ADJUSTING SCREW |
| 04PP050-093EP | 10"FILTER CARTRIDGE PP 50 MIC |
| PROPL-TE40-10P-A | PRESSURE FEED PROLITE SPRAYGUN |
| 102-3423 | PISTON |
| HGB-28 | BONNET |
| AGMDPRO-10-K4 | CAP SCREW (KIT OF 4) |
| ADV-PCDT-16 | ADVANCE PRESS SPRAYGUN CONV |
| 207-11205 | MODIFIED SCREW |
| DX70R3-WF | DX70 REGULATED WALL MOUNT |
| DXK-102 | FIXING KIT |
| KK-4504-FXH-797 | CAP.TIP.NEEDLE - JGA/V.GFG/V |
| A12768-06 | FIBER OPTIC, FLOWMETER |
| GTIPRO-T1B-13 | GRAVITY GUN & CUP - BASE |
| 76416-04 | FLUID TUBE,S.S.,.041ORIFICE |
| 192652 | DIA 47 INTERNAL CIRCLIP |
| GTIPPRO-2K-C3-12 | SPRAYGUN 2K VERSION |
| 6T-12MMTF | ADAPTOR 3/8"NPT(M)X12MM TUBE FITTING |
| 31638-SS-383 | HOSE CONN.3/8"NPS(F) F.3/16 |
| 84-458 | DIAPHRAGM |
| 12230-26 | HOSE, TRANSPARENT |
| 116572 | GASKET UNIT VAR. B |
| 0114-013525 | HP FILTER 01 |
| 79501-02500 | VECTOR R70 CASCADE GUN |
| H-4043 | RED-STCK 9/16 X 1/4NPS |
| DSG-21-39-5 | DICHTUNG (VE 5 STÜCK) |
| HGS-5132 | FLUID REGULATOR SS |
| 0114-016021 | NIPPLE R3/8 X 1/4 UNIVERSAL SS |
| SP-100-522-K | BOXED AIRCAP/RING.TRANSTECH |
| DEV-FYYY1079 | AIR GUN + QD AQUALINE 30 |
| 1414-T-SG | HOSE CONNECTOR 1/4"NPT(M) |
| A12720-00 | FLOWMETER RECEIVER |
| 0114-013889 | PISTON PLATE LM-200/120 |
| GTI-450-115-13 | CAP.TIP & NEEDLE KIT |
| 82-467-5 | GASKET - LEATHER (PACK OF 5) |
| CBA1-522-085 | COBRA 1 AUTO GUN/CAP TRANSTECH |
| 41-645 | COUPLING |
| A13434-02 | HEATER ONLY |
| CBA1-510-18 | COBRA 1 AUTO GUN/CAP TRANSTECH |
| 23886-740-2923 | WELLE LÄNGE =2923MM |
| AGMD-278-12 | PLATE |
| 20-1544-5 | BALL S.S. 5/16 IN |
| 102-1749 | PLUNGER |
| DXK-217 | NON-REGULATED CONVERSION KIT |
| FX4UC | FX4 FLUID SECTION U CUPS |
| 104010 | MAPLE 30 PUMP ASSY 3:1 RATIO |
| AGMD-251-K-S | MACHINE ADAPTER FOR CERAMIC SS |
| 41-236 | SPRING |
| 6X8-14-SS-90 | CONNECTOR 1/4NPS(F) / 6X8 90° |
| 7697-00 | SHELL, POWER SUPPLY END |
| PRO-450-T2-13 | CAP.TIP & NEEDLE KIT, GTIPRO |
| 862047 | KIT ASM |
| GTI-214-20-K | BOXED FLUID TIP (2.0MM)HI-FLOW |
| SO31221-8-1/8 | GER.AUFSCHRAUBVERSCHRAUBUNG |
| 59-102 | WREN REPAIR KIT |
| SP-200S-13-K | BOXED FLUID TIP (COMPACT) |
| 70155-02 | BULKHEAD ASSY,DW-FD,7015 |
| AGMD-9-310-01 | ADAPTER BLOCK |
| 0400400013 | CLAMPING PLATE TOOTH BELT |
| 101982 | THREADED CONNECTION 1/4"-4MM I |
| 8WD4328-1XX | LIGHT BULB 24V 5W |
| 80143-242 | 9060 LOW VOLTAGE CONTROL UNIT KIT (ATEX) |
| AGMD-414710-1 | HOSE CONNECTION 7X10 F. WS14 |
| DVP-33 | QUADRING 2X1.5 NITRIL |
| AGMD-705 | AIR CAP |
| AGMD-305-F-002 | ROBOT HOSE PACKAGE 5F 3,5M |
| DNT1212MSV | DOUBLE NIPPLE |
| ADV-P497-22 | ADVANCE PRESS SPRAYGUN CONV |
| 20-5376 | O-RING 1-1/8 ID X 1-1/4 O |
| 0114-013931 | DOUBLE PISTON ROD |
| VIP-4B-4-90 | SWEEP F. VIPER GUN 1/4"BSP(M) |
| GTIPRO-H1C-13 | GRAVITY GUN & CUP - CLEAR |
| ADV-G505-13 | ADVANCE GRAVITY GUN KIT HVLP |
| EMF-195 | NOZZLE FLUID HOLE |
| GTIPRO-T110B-13A | GRAVITY GUN & CUP - BASE |
| 191791 | BALL 1 1/2" 440C ST ST |
| GTIPPRO-T110-10A | PRESSURE FEED PRO SPRAYGUN |
| AGMD-95 | O-RING VI 980,G 8 X 1 |
| 54-7539-K2 | TWIST TIP BRACE (PACK OF 2) |
| HGS-28 | ADJUSTMENT SEAT |
| 106-1120 | SPARE PARTS KIT (MAVRICK |
| 00-00-0001320 | FILTER 200 MESH, RED, 10 PCS |
| GTISPRO-T110-20A | SUCTION FEED PRO SPRAYGUN KIT |
| 41-1242 | PACKING PTFE |
| JGV-457-K | WATERBASED BAFFLE HEAD/SEAL |
| 188049 | PIN |
| 3814-T-SG | HOSE FITTING 1/4"NPT(M) |
| 80401-65 | ATOMISATION KIT, V SERIES |
| MXL432PU-P-F-ACG | MXL432PU,PAIL, AC GUN & HOSE |
| 873288 | FLUID CAP |
| 7300-9 | PINION |
| F-IA-010 | O-RING 18X1 |
| 54-5447 | CARTRIDGE ASSEMBLY |
| DXA-DVG | GRAVITY FEED DUMP VALVE |
| 0115-010705 | 3/8" F - 1/4" M ADAPTER |
| ADV-P510-12 | ADVANCE PRESS SPRAYGUN T/T |
| 79524-10 | VECTOR FL. HOSE 3/16" 90KV 10M |
| A12873-00 | SHAPING AIR RING,30MM,RMA-560 |
| ADV-310C-22 | FLUID NEEDLE CARBIDE 22 |
| FX12PU | FX12 FLUID SECTION PTFE/UHMWPE |
| ADV-P497-14 | ADVANCE PRESS SPRAYGUN CONV |
| MPV-2-K5 | DISPOSABLE HOODS (PACK OF 5) |
| 79206-00 | SCREW,SL/FIL-HD/MACH |
| MPV-43-K5 | BREATHESAFE RECORD CARD (X5) |
| 83-2706 | 200 MESH SCREEN |
| A11535-00 | SPLASH PLATE GAGE |
| 102-2720 | SPARE PARTS KIT-MACH1 PC |
| AGMD-515G-122C | AUTOMATIC SPRAY GUN |
| 79503-12500 | VECTOR R90 CLASSIC GUN AND 10M |
| 171789 | 2" ST ST BALL 440C |
| EMG-300N-08-K | HARDENED NEEDLE KIT |
| 52-543 | EA EXT. NEEDLE 24" |
| 250452 | OVERHAUL KIT FOR HP REG 107906 |
| PROC-120-C67-K | CERAMICS AIR CAP |
相关产品
- RANSBURG、DEVILBISS、BGK、BINKS喷枪207-11183
- RANSBURG、DEVILBISS、BGK、BINKS喷枪41-12566
- RANSBURG DEVILBISS、BGK、BINKS喷枪52-2372NOZZLE TIP
- RANSBURG DEVILBISS、BGK、BINKS喷枪102-3808
- RANSBURG DEVILBISS特威喷枪0114-014048 GAUGE
- DEVILBISS特威喷枪79650-00 FLUID FITTING
- DEVILBISS特威喷枪79156-1141 TUBING BUNDLE
- DEVILBISS特威喷枪MXL412PP-T-AC MXL412PP, TRIPOD